24kv Elbow Separable Connector/ T Cable Connector/Tee Body Connector/Separable Connector

RUJT-2 Unscreened connector system is a right angled adapter designed to fit over standard MV cable terminations when used with equipment bushings to Type C according to EN 50180 and EN 50181. 

The boot can be easily disconnected for testing and then reconnected with standard tooling under dead break conditions. The body is made from Silicon rubber based material with excellent antitracking properties. The body and termination are not screened and therefore during operation the surfaces will be considered live and must not be touched.

For Voltage Range 6/10(12)kV up to 8.7/15(17.5)kV

For connection to C type bushings according to EN 50180 and EN 50181

One size is suitable for all cable types from 70 - 300mm2

Easy to install with comprehensive instructions included in each kit

Unlimited shelf life at normal storage temperatures

Kit Contents: 3 x Boots , 3 x Silicone Grease ,3 x Cleaning papers, 3 x Stainless steel bolts with nuts,1 x Installation Instructions.