close
Choose Your Site
Global
Social Focus
 |
EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
630A IEC type Rear connector connect with IEC type tee connector or other model Rear connector,extended cable connection circuit (branch), it can not be directly connected with the sleeve socket, wall bushing and so on. The tail can be plugged directly with insulating plug, but also can be extended to connect with the rear connector of another line or Rear connector with surge arrester.
It is suitable for XLPE cable with 25mm²~400mm² cross-section of cable.
Body of Rear connector Silicone grease 、 towels
Stress cone Instruction Manual
Positioning chain、Phase ribbon Conductive rod
gauze Dust cap
Terminals Rulers for installation
Bolt stud Conformity certificat
3 pcs/ carton G.W：5.4kg Carton size：26cm×23.5cm×20cm
1、Bolt stud：adopt stainless steel bolts to ensure conductor and sleeve close fit.
2、Insulating layer: special formula and mixing technology to ensure high quality of prefabricated silicone rubber
3、Internal semi conductive layer: prefabricated inner semi conductive layer to effectively control the stress of electric field.
4、Outer semi conductive layer: The prefabricated outer semi conductive layer adheres closely to the insulating layer and ensures that the outer semi conductive layer is grounded.
5、Insulating plug：Epoxy resin insulating plug with threaded metal parts to ensure close cooperation with the stud.
6、Semi-conductive end cap：seal the end of the cable connector, so that the device has a full-screen, all-sealed function.
7、Stress cone：Different size of the stress cone with the use of cable connectors, to ensure water seal and cable stress release.
8、Grounding hole: Pre-wired to the outer shield for ground wire connection.
9、Terminals: All copper or copper and aluminum crimp terminals for copper or aluminum conductor.
10、Positioning chain：Make sure the installation location is correct.
When order,please indicate the product model, voltage level, current level, the material of cable, cross-section of cable, whether with live displaying device.If users have special requirements, please indicate in the contract.
EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
630A IEC type Rear connector connect with IEC type tee connector or other model Rear connector,extended cable connection circuit (branch), it can not be directly connected with the sleeve socket, wall bushing and so on. The tail can be plugged directly with insulating plug, but also can be extended to connect with the rear connector of another line or Rear connector with surge arrester.
It is suitable for XLPE cable with 25mm²~400mm² cross-section of cable.
Body of Rear connector Silicone grease 、 towels
Stress cone Instruction Manual
Positioning chain、Phase ribbon Conductive rod
gauze Dust cap
Terminals Rulers for installation
Bolt stud Conformity certificat
3 pcs/ carton G.W：5.4kg Carton size：26cm×23.5cm×20cm
1、Bolt stud：adopt stainless steel bolts to ensure conductor and sleeve close fit.
2、Insulating layer: special formula and mixing technology to ensure high quality of prefabricated silicone rubber
3、Internal semi conductive layer: prefabricated inner semi conductive layer to effectively control the stress of electric field.
4、Outer semi conductive layer: The prefabricated outer semi conductive layer adheres closely to the insulating layer and ensures that the outer semi conductive layer is grounded.
5、Insulating plug：Epoxy resin insulating plug with threaded metal parts to ensure close cooperation with the stud.
6、Semi-conductive end cap：seal the end of the cable connector, so that the device has a full-screen, all-sealed function.
7、Stress cone：Different size of the stress cone with the use of cable connectors, to ensure water seal and cable stress release.
8、Grounding hole: Pre-wired to the outer shield for ground wire connection.
9、Terminals: All copper or copper and aluminum crimp terminals for copper or aluminum conductor.
10、Positioning chain：Make sure the installation location is correct.
When order,please indicate the product model, voltage level, current level, the material of cable, cross-section of cable, whether with live displaying device.If users have special requirements, please indicate in the contract.
