Integration of renewable energy sources into the electrical system in Germany has required adapting and expanding the ex
Lightning Arrester is an electrical appliance used to protect electrical equipment from high transient over-voltage haza
Insulators should have sufficient insulation strength and mechanical strength. They should not only withstand the effect
A composite insulator is an electrical insulating device made of multiple materials. The most common type of strain insu
Thermal imaging has for years served as a practical and cost-effective means of assessing the condition of surge arreste
The basic performance of plug accessories can be divided into three categories: mechanical performance, electrical perfo
Application of RTV silicone coatings to porcelain and glass insulators in order to increase their pollution performance
The EEX14R position switch, slim design, with roller plunger is designed as a safety switch with positive contact and is intended for use in potentially explosive areas. It complies with the requirements of the EN81-20 / EN81-50 safety standard regulations. The actuation is done by a roller tappet which can be approached at an angle that may
Air Break Substation Switches Air Break Transmission Switches Load Handling
MICC provide a complete range of MI cable accessories, terminations and tools needed to carry out a full professional installation, including pyro cable cutter, MI cable termination
Explosion Proof Switch. Aluminum flame proof or glass reinforced plastic increased safety housing. On-off switch or change-over switch model. Lower to 32A working current to
Select whether it is DC or AC, single or three phase and then look at the nominal voltage of the system, 230/400 or 1000 V for solar, then look at the voltage level protection. In, peak
Yes, surge arresters can be used alongside different protecting units like fuses and circuit breakers to supply complete electrical machine protection.