Designing overhead lines and substations that will perform reliably for decades has always been a remarkable challenge.
Different types of insulators with hydrophobic properties have now become commercially available, including composite in
lightning arresters can protect our lives and property. Do you know how a lightning arrester works? What are the specifi
Our company received the Award notice of DDLO products on May 6th, which is already the second product we have cooperate
After the cable is laid, to make it a continuous line, each segment of the line must be connected as a whole, and these
Fuse cutout refers to an electrical appliance that fuses the melt with the heat generated by itself when the current exc
Insulators should have sufficient insulation strength and mechanical strength. They should not only withstand the effect
As surge protective devices, arresters mitigate the impact of events that might otherwise trigger outages and monitoring
Surge arresters can prolong the lifespan of gear with the aid of stopping harm from voltage surges and transient events.
Test standard: IEC 61643-1:2005; GB 18802.1-2011 Low Voltage Surge Protector (SPD) Part 1 Surge Protector for Low Voltage Distribution System-Performance Requirements and
Composite insulators are designed to operate within a temperature range of approximately -40°C to +80°C (-40°F to +176°F).
Lockable handler; Download Datasheet Request A Quote. IP65 Enclosed rotary AC isolator switch up to 63A. AC switch rated 40A to 63A, 230V-440V outdoor AC applications. The AC isolator can be installed at solar inverter AC side, and match any AC applications in the voltage range. AC Disconnect Switch 125A BYAF-125 UL Listed;
Yes, China Composite Insulators are resistant to electrical tracking from airborne pollutants, ensuring reliable performance in polluted air.
RAYANA 12V Motorcycle ATV 10mm Mirror Mount Switches Motorbike Headlight Hazard Brake Fog Lights ON-Off-ON Waterproof Switch Toggle Switches (Color : Right) 4.0 4.0
Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. To prevent accidental activation, they require a key to turn lights on and off.
