15kv Pin Type Porcelain Insulator for Overhead Line (BS)
Home » Products » Insulator » Porcelain Insulator » 15kv Pin Type Porcelain Insulator for Overhead Line (BS)

loading

Share to:
sharethis sharing button

15kv Pin Type Porcelain Insulator for Overhead Line (BS)

Porcelain insulators,also named ceramic Insulators are made from clay, quartz or alumina and feldspar, and are covered with a smooth glaze to shed water. Insulators made from porcelain rich in alumina are used where high mechanical strength is a criterion. Porcelain has a dielectric strength of about 4–10 kV/mm.It also has perfect dielectric performance.Porcelain insulators are widely used in overhead transmission lines to provide mechanical support and electrical protection, as well as in distribution lines and substations. Depending on voltage considerations, different kinds of insulators are used in power systems,we have Pin insulator,strain insulator,suspension insulator.post insulator,long rod insulator,horizontal post insulator,Railway insulator,shackle insulator,stay insulator.
Availability:
  • P-11-Y

Insulators are a special insulation control that can play an important role in overhead transmission lines. In the early years, insulators were mostly used for telegraph poles. Slowly, a lot of disk-shaped insulators were hung on one end of the high-voltage wire connection tower. It was used to increase the creepage distance. It was usually made of glass or ceramics and was called an insulator. Insulators should not fail due to various electromechanical stresses caused by changes in the environment and electrical load conditions, otherwise the insulators will not have a significant effect and will damage the use and operating life of the entire line.


The main function of insulators is to achieve electrical insulation and mechanical fixation, for which various electrical and mechanical performance requirements are specified. If under the specified operating voltage, lightning overvoltage and internal overvoltage, no breakdown or flashover along the surface; under the specified long-term and short-term mechanical load, no damage and damage; under the specified machine , After long-term operation under electrical load and various environmental conditions, no obvious deterioration will occur; the fittings of insulators will not produce obvious corona discharge under the operating voltage, so as not to interfere with radio or television reception. Because insulators are widely used devices, their connection fittings are also required to be interchangeable. In addition, the technical standards of insulators also require various electrical, mechanical, physical, and environmental conditions to test the performance and quality of the insulators according to different types and conditions of use.


Specifications

Pin Porcelain Insulators (ANSI BS)

1.voltage:23-69kv

2.creepage distance:330-865mm

3.weight:3.7-13.5kg

4.good use-best price


Pin Porcelain Insulators (ANSI BS series)


Summary

1) Material:porcelain

2) Class BS: P-11-Y  P-15-Y   P-20-Y    P-33-Y

3)pin type insualators for high voltage

4)safe usage

5)various desigins available

6)fast shipping and great service

7)good quality and reasonable price

8i87_02

Main dimensions and standard particulars
Fig 1 1 2 3
Class BS P-11-Y P-15-Y P-20-Y P-33-Y
Main Dimensions (mm) H 133 137 195 244

h 48 48 52.63 52.63

D 140 152 230 279

d 18.29 18.29 27.78 27.78

R1 13 13 19 19

R2 9.5 12.7 14.3 13
Nominal Voltage (kV) 11 15 22 33
Creepage Distance (mm) 240 298 432 630
Minimum Flashover Voltage Power-frequency Dry (kV) 75 80 100 135
Wet (kV) 45 55 60 85
50% Impulse Positive (kV) 100 130 160 185
Negative (kV) 110 175 205
Withstand Voltage One minute power- frequency Dry (kV) 65 70 90 110
Wet (kV) 40 50 55 75
mpulse (kV)
110 150
Radio- Influence- Voltage Data Test Voltage to Ground (kV) 15 15 22 30
Maximum RIV at 1000kHz (uV) 8000 8000 12000 16000
Power-frequency puncture Voltage(kV) 135 135 145 185
Cantilever Failing Load(kN) 11 11 11 13
Weight (kg) 1.8 - - 11.5



Previous: 
Next: 

PRODUCT

QUICK LINKS

CONTACT US

Email:  jonsonchai@chinahaivo.com

             sales@chinahaivo.com

             54442019@qq.com

Wechat:+86 13587716869

WhatsApp:+86 13587716869

Tel:       0086-577-62836929

              0086-577-62836926

              0086-13587716869

              0086-15957720101

Get Touch With Us

Contact us

If you have any questions, you can contact us through the form.

Copyright © 2020 Haivo Electrical Co.,Ltd Support  by  leadong.com   Sitemap  |  Privacy Policy