close
Choose Your Site
Global
Social Focus
 |
TT
HAIVOL
EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
T type connector is all-insulated, fully sealed, used for underground high-voltage cable connection, such as the American cabinet type transformer , ring main unit and cable branch box. Continuous operating current is 600A, connect the cable of relevant specifications, For convenience and quickly to find the fault,install potential indicator on the test point , and can also install the cable fault indicator .
When the T type connector connect with 600A / 200A load Conversion connector,it can convert 600A line to 200A line, then connect to 200A Elbow type connector and Elbow type connector with surge arrester.
Body of T type connector
Stress cone
Instruction Manual
Conformity certificat
Crimp Terminals
Bolt stud
Silicone grease
Insulating plug
(include Semi-conductive end cap)
Dust cap
Towels
Summary
1、Bolt stud：adopt stainless steel bolts to ensure conductor and sleeve close fit.
2、Insulating layer: special formula and mixing technology to ensure high quality of prefabricated EPDM rubber
3、Internal semi conductive layer: prefabricated inner semi conductive layer to effectively control the stress of electric field.
4、Outer semi conductive layer: The prefabricated outer semi conductive layer adheres closely to the insulating layer and ensures that the outer semi conductive layer is grounded.
5、Insulating plug：Epoxy resin insulating plug with threaded metal parts to ensure close cooperation with the stud.
6、Semi-conductive end cap：seal the end of the cable connector, so that the device has a full-screen, all-sealed function.
7、stress cone：Different size of the stress cone with the use of cable connectors, to ensure water seal and cable stress release.
8、Grounding hole: Pre-wired to the outer shield for ground wire connection.
9、Terminals: All copper or copper and aluminum crimp terminals for copper or aluminum conductor.
10、Voltage test : it is used to test whether the line is electrified or not and the live indicator is used
Warm Tips：
When order,please indicate the product model, voltage level, current level, the material of cable, cross-section of cable, whether with live displaying device.
If users have special requirements, please indicate in the contract.
EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV）
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
IEEE 386 Separable insulated connector system for power distribution system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
T type connector is all-insulated, fully sealed, used for underground high-voltage cable connection, such as the American cabinet type transformer , ring main unit and cable branch box. Continuous operating current is 600A, connect the cable of relevant specifications, For convenience and quickly to find the fault,install potential indicator on the test point , and can also install the cable fault indicator .
When the T type connector connect with 600A / 200A load Conversion connector,it can convert 600A line to 200A line, then connect to 200A Elbow type connector and Elbow type connector with surge arrester.
Body of T type connector
Stress cone
Instruction Manual
Conformity certificat
Crimp Terminals
Bolt stud
Silicone grease
Insulating plug
(include Semi-conductive end cap)
Dust cap
Towels
Summary
1、Bolt stud：adopt stainless steel bolts to ensure conductor and sleeve close fit.
2、Insulating layer: special formula and mixing technology to ensure high quality of prefabricated EPDM rubber
3、Internal semi conductive layer: prefabricated inner semi conductive layer to effectively control the stress of electric field.
4、Outer semi conductive layer: The prefabricated outer semi conductive layer adheres closely to the insulating layer and ensures that the outer semi conductive layer is grounded.
5、Insulating plug：Epoxy resin insulating plug with threaded metal parts to ensure close cooperation with the stud.
6、Semi-conductive end cap：seal the end of the cable connector, so that the device has a full-screen, all-sealed function.
7、stress cone：Different size of the stress cone with the use of cable connectors, to ensure water seal and cable stress release.
8、Grounding hole: Pre-wired to the outer shield for ground wire connection.
9、Terminals: All copper or copper and aluminum crimp terminals for copper or aluminum conductor.
10、Voltage test : it is used to test whether the line is electrified or not and the live indicator is used
Warm Tips：
When order,please indicate the product model, voltage level, current level, the material of cable, cross-section of cable, whether with live displaying device.
If users have special requirements, please indicate in the contract.
